WITSON GHV3210 10.25 Inch Android 15 QLED Dual System Car Stereo for Range Rover Evoque L551 / L538 2012-2020 GPS CarPlay 4G DSP

WITSON GHV3210 10.25 Inch QLED Dual System Android 15 Car Stereo for Range Rover Evoque L551 / L538 2012-2020

WITSON GHV3210 is a 10.25 inch QLED OEM style head unit built for the Range Rover Evoque L551 / L538, model years 2012-2020. The dual system design keeps the original Land Rover menu – climate display, factory settings and the original look – and runs a full Android 15 system on top of it, with one tap to switch. The panel is moulded from the factory bezel and reuses the original clips, so the dashboard keeps its factory shape: no cutting, no adapter frame, and the original radio can be put back.

The GHV3210 as shipped: 10.25 inch QLED panel, OEM style housing moulded from the Evoque bezel, connector side matched to the factory harness.

1. Vehicle Fitment - Range Rover Evoque L551 / L538, 2012-2020

The Evoque dashboard changed three times during this run, so the unit is produced in three versions. Screen, harness and functions are identical; the mounting frame and the CANBUS setting are not. Match the version to the head unit that came out of your car, or send a photo of the centre console and the VIN and we confirm it before shipping. Left hand drive and right hand drive cars use the same unit.

How to tell which Evoque dashboard you have

The three centre consoles look similar in a photo taken from the driver seat, which is why orders get the wrong frame. The official note below is the one we publish on witson.com: the BOSCH car has a CD function and the traditional UI, the HARMAN car has no CD function and a new UI, and the climate panel below the screen is different as well. Compare the two with your own console before you order, or send us a photo.

Official fitment note from witson.com: BOSCH head unit versus HARMAN head unit on the Evoque - traditional UI with CD function against new UI without CD function.

The official model table for this range: 3210A, 3210B and 3210C, each in 2GB+32GB and 4GB+64GB, left and right hand drive. This listing is the 4GB+64GB version.

Complete centre consoles side by side - factory original unit, BOSCH unit and HARMAN Kardon unit - so the shape of your own dashboard can be checked before ordering. The poster groups Type A and Type B under 2012-2016; use the fitment table above as the reference, where the BOSCH version starts in 2014.

2. Dual System Design - Original Menu Plus Android

Most Android upgrades for the Evoque replace the factory interface completely, and the driver loses the climate screen and the original settings. This unit keeps both: the original Land Rover interface stays available and Android runs alongside it. Switching takes one tap, so the car keeps its factory feel while the driver gets Google Maps, CarPlay, Android Auto, 4G and apps.

Dual system: factory controls, vehicle settings and one touch switch stay on the original side; CarPlay, navigation and apps run on the Android side.

3. Product Details

4. Official Product Photos - the Same Files Published on witson.com

The photos below are the original product photography of this unit, taken from our main site, not a render and not a stock picture. Front panel, back plate with the WITSON moulding, the connector side, the Android launcher and the factory menu are all shown, so the unit on this page and the unit on the manufacturer site can be compared one to one.

5. Main Functions in Pictures

The posters below are produced for this model by our own design team and are the same artwork used on our China shop listing and in the distributor catalogue. Each one covers a single selling point, so a buyer can check the panel shape, the covered car list, the original system and the installation result before ordering.

Catalogue poster: 10.25 inch QLED OEM upgrade for the Evoque, original system kept, wireless CarPlay and Bluetooth on the Android side. Later model years are covered by Type C - see the fitment table in section 1.

Before and after in the same car: factory display on top, 10.25 inch QLED unit below. The vents, the climate panel and the trim stay where they were.

6. Installation - Plug and Play, No Cutting

The harness is plug and play: the factory connector of the Evoque plugs into the decoder box, the decoder box plugs into the unit, and the original clips hold the frame. A competent installer finishes the swap in about 60 to 90 minutes, no wire is cut, and the original radio can go back in if the car is sold. The wiring diagram below is the official 3210B one for the BOSCH car - every plug is numbered, so the installer can match the car before taking the dashboard apart; the A and C versions are published on the same product page on witson.com.

Official 3210B wiring diagram for the BOSCH car: 4G antenna, original car CD, original car screen, 4G SIM card, microphone, parking line, two USB leads, rear view camera input, BACK wire, WiFi / Bluetooth antenna and GPS antenna.

We send the wiring sheet for your version with every unit, and we answer installation questions by photo or video call if the installer gets stuck.

7. What Is in the Box

Photographed as shipped: the unit, the vehicle specific harness, the CANBUS box, the external microphone, the GPS antenna and the USB leads.

• 10.25 inch QLED Android head unit x 1
• Vehicle specific plug and play harness x 1 (Type A, B or C)
• CANBUS decoder box x 1
• External microphone x 1
• GPS antenna x 1
• USB extension cables x 2
• Reverse camera cable x 1
• Wiring sheet and user manual x 1

Everything needed for a standard installation is in the carton, so the workshop does not have to source an extra harness or a CANBUS adapter.

8. Packing, Price and Shipping

Transit time is counted separately from the lead time and depends on the destination country and the shipping method. For sample orders we normally ship by express; for volume orders we can ship by sea with the carton marks you require.

9. Certifications and Quality Control

The WITSON GHV3210 is CE, FCC and RoHS compliant, and every unit is powered on, paired with a phone and audio tested before packing. The firmware is written for the Evoque platform, so the CANBUS messages, the climate display and the parking radar behave the same way as on the original radio. Firmware updates and UI language packs are available from WITSON after sales.

Nothing in this section is a stock photo. The four frames below are taken from a walk through our line in Shenzhen this year, where this range is built. The full procedure is published on our main site: WITSON quality control.

10. About WITSON - the Factory Behind This Unit

WITSON (Zhuhai Witson Industrial Co., Ltd) has been building car multimedia since 2003, with the Shenzhen factory set up in 2004. The plant covers about 3,500 square metres with 95-125 production staff, 6-8 QC engineers and 4-5 R&D engineers, and 5-8 new models are released every month. All products are designed in house and produced with our own tooling and moulds – the Evoque frame of this unit is our own mould, which is why the fitment is stable from batch to batch.

We are the manufacturer, not a trading company: the model numbers are unique to our factory, the firmware is written by our own team, and the person who answers your fitment question is the person who can change the CANBUS setting. The full specification and the installation manual of the GHV3210 are published on our main website: WITSON 10.25 inch QLED dual system product page, and the plant itself is introduced here: WITSON factory.

11. Frequently Asked Questions - GHV3210 for Range Rover Evoque L551 / L538 2012-2020

Does the WITSON GHV3210 fit my Range Rover Evoque, and which version do I need?

The GHV3210 covers the Evoque L551 / L538 from 2012 to 2020 in three versions. Type A is for the 2012-2016 car with the factory original unit, Type B for the 2014-2016 car with the BOSCH unit (the one with a CD function), and Type C for the 2017-2020 car with the HARMAN Kardon unit. Send a photo of your centre console and the VIN and we confirm the version before shipping.

What is the dual system, and do I lose the original Land Rover menu?

No, the original menu stays. The unit keeps the factory Land Rover interface - climate display, vehicle settings and the original look - and runs Android alongside it. One tap switches between the two, so you keep the factory feel and still get CarPlay, Google Maps and apps.

Will the steering wheel buttons, the climate display and the parking radar still work?

Yes. A CANBUS decoder matched to the Evoque is in the box, so the steering wheel buttons, the trip information, the climate status and the factory parking radar keep working after the radio is replaced. On this dashboard the air conditioning status is also shown on the new screen.

Is CarPlay wireless on the GHV3210, and does it keep the factory microphone?

Yes. Apple CarPlay connects wirelessly and Android Auto runs wired or wirelessly. The factory microphone position is used for hands free calls, and an external microphone is in the box for cars where the original microphone is not compatible.

What are the screen and hardware specifications?

10.25 inch QLED capacitive touch screen at 1920 x 720, Android 15 on a UIS7862 octa core processor (2 x Cortex A75 + 6 x Cortex A55), 4GB RAM + 64GB ROM, built-in 4G LTE, dual band WiFi, Bluetooth 5.0, DSP with time alignment and 4 x 45W output.

Does the GHV3210 support a reverse camera, a 360 panorama and a DVR?

Yes. The unit has a reverse camera input and keeps the factory camera where the car has one. For a 360 panorama the board needs the 1080P 360 chip, which is US$10 extra on this platform (it is already included on the Qualcomm solution). DVR is supported as an option - tell us which camera kit you use and we ship the matching harness.

What is the price, and how fast can you ship one piece?

US$260 - US$280 / piece, MOQ 1 piece. In-stock units leave within 24 hours after payment and standard production takes 3-7 working days. Express delivery is 4-7 days door to door, air freight 8-12 days and sea freight 30-40 days. FOB Shenzhen or door to door with tax paid can both be quoted.

Can you print my logo and put my model number on the box?

Yes. Logo, model number, startup logo, UI menu and colour box are available from 100 pieces, and the sample can be built with your logo as well.

12. Order the GHV3210 10.25 Inch Dual System Unit

Send the model year, a photo of your centre console and the destination port, and we reply with the exact frame version (A, B or C), the price for one piece and for 100 pieces, and the shipping cost to your door. Mixed containers with other WITSON Land Rover and Jaguar models are welcome – one container can carry the whole HV3 range. The full range is listed on www.witson.com.